MR360 Machine Receiver with Remote Display

$2,995.00 + GST

SKU: I-GM-MR360-RD Category: Tags: ,

The MR360R offers accurate grade information for all visual machine control applications. Large 360° detection windows pick up any rotating laser, from any angle. Built-in vertical indicator monitors angle of the stick, signaling if it’s plumb or under- or over-extended. Receiver has plumb LED indicator; remote display has direction arrows for plumbing up the dipper stick. Saves money by reducing over – or under-cuts.

 

Available on backorder

GeoMax MR360 Machine Receiver With Remote Display Information:

The GeoMax MR360 Machine Receiver with Remote Display offers accurate grade information for all visual machine control applications. Large 360° detection windows pick up any rotating laser, from any angle.

Large 360° detection windows pick up any rotating laser from any angle. MR360R incorporates a built-in vertical indicator that monitors angle of the stick, signalling if it is plumb or under/over extended.
The receiver has plumb LED indicator, and the remote display shows direction arrows for plumbing up the dipper stick.
  • 360° detection windows for total coverage
  • In-cabin remote display for best control on operations
  • No cables required
Mag mount for supreme portability. Clamp mount option available.

MR360 Machine Receiver With Remote Display Specifications:

Range 200m
Accuracy (Fine) +/-3mm
Accuracy (Coarse) +/-6mm
Reception angle 360°
Reception height 25cm
Power NiMh rechargeable batteries
Battery life 130 hours
IP protection IP67
Weight w/o battery 1.8kg
Size 375mm x 75mm x 107mm

Agatec MR360R at a glance

MR360R Receiver – Overview

LED indicators on receiver
LED indicators show position of cutting edge in relation to the laser reference beam. Seven display channels (indicators) in coarse mode; nine channels in fine mode.Receiver has plumb LED indicator. Rugged, waterproof construction. Built-in shock mounts minimize machine vibrations.
LED Indicators on remote display
Remote display has direction arrows for plumbing up the dipper stick. If used on a dozer or grader, these LEDs can be turned off for a simpler display and longer battery life. Memory stores the last signal received. Arrows indicate which way to move the cutting edge to reach the reference plane.

 

Get in touch

Contact Us

Request more info about: MR360 Machine Receiver with Remote Display

Get in Touch

Please contact us if you require any further information.

  • This field is for validation purposes and should be left unchanged.