With its ISO 21501-4 conformity, the PC220 can be used for various measuring functions from testing cleanrooms and filter efficiency to monitoring burdens at workspaces and quality assurance.

All measured values of the six particle size channels are shown simultaneously on the 2.8 inch colour LCD display.

An additional colour indicator display with automatic acoustic alarm makes it easier to quickly detect critical particle concentrations.

Besides the size and amount fractions of air particles the PC220 also detects environmental factors such as air humidity,air, dew and wet-bult temperature.

Moreover the particle counter PC220 has a built-in HCHO detector, which can measure the formaldehyde concentration in the room air from 0,01 ppm.

The particle counter PC220 enables the quantitative assessment of particulate emissions with an aerodynamic diameter smaller than 10 μm (E-dust) and 2,5 μm (A-dust). The dust fractions are measured and their parts per cubic meter of room air (μg/m³) are indicated on the colour display.

The photo and video documentation of measuring environment takes place by means of a bulit-in digital camera. The PC220 data logging function can store up to 5,000 measurement records on its internal memory. This can be expanded by up to 16 GB with a MicroSD card, which significantly raises the storage capacity. After measuring, all detected data can be quickly and easily transmitted to a PC via a USB interface for documentation or analysis.

A few practical benefits:

• Particle counter with durable laser diode
• Conforms with ISO 21501-4
• 6 particle size channels from 0.3 to 10 μm
• Detects size fractions and concentrations of air particles
• Built in gas-detector for formaldehyde and carbon monoxide concertration
• Direct conversion and indication of concentrations of E-dust and A-dust in the room air per cubic meter
• Also measures environmental factors such as air temperature, humidity, dew and wet-bulb temperature
• Data logger for 5,000 measurements on the internal memory (optional memory expansion of up to 16 GB with a MicroSD card)
• Integrated digital camera for photo and video documentation of the measured environment
• Additional colour indicator display with automatic acoustic alarm for quick detection of critical particle concentrations
• 2.8 inch colour LCD display with backlight for simultaneous display of all measured parameters
• Ergonomic single-handed operation
• Tripod mount for continuous measurement on a tripod
• PC measurement data export via USB interface
• Supplied with a calibration certificate

Technical details of the PC200:

Particle counter

• Measuring channels: 6
• Channel sizes: 0.3 μm, 0.5 μm, 1.0 μm, 2.5 μm, 5.0 μm, 10.0 μm
• Counting modes: Concentration, cumulative, differential
• Counting efficiency: 50% at 0.3 μm; 100% for particles > 0.45 μm
• Flow rate: 2.83 l/min (0.1 ft³/min), controlled by internal pump
• Zero count: < 1 particles / 5 min.
• Coincidence loss: 5%, 2 million particles per ft³ (28.3 litres)
• Light source: Laser class 3B, wave length 780 nm, 90 mW
• Sample inlet: Isokinetic probe

Air temperature

• Measuring range: 0°C to 50°C (32°F to 122°F)
• Accuracy: ±0.5°C (0.9°F) at 10°C to 40°C (50°F to 104°F), ±1.0°C (1.8°F) at other temperature ranges

Humidity

• Measuring range: 0 to 100% RH
• Accuracy: ±3% at 40% to 60%, ±3.5% at 20% to 40% and 60% to 80%, ±5% at 0% to 20% and 80% to 100%

Dew point temperature

• Measuring range: -30°C to 100°C (-22°F to 199°F)
• Accuracy: ±0.5°C (0.9°F) at 10°C to 40°C (50°F to 104°F), ±1.0°C (1.8°F) at other temperature ranges

Wet-bulb temperature

• Measuring range: 0°C to 80°C (32°F to 176°F)
• Accuracy: ±1.0°C (1.8°F)

Formaldehyde (HCHO)

• Measuring range: 0,01 up to 5,00 ppm
• Accuracy: ±5 of the final value

Carbon monoxide (CO)

• 10 up to 1.000 ppm
• Accuracy: ±5 of final value

Conversion of particulate mass

• PM2.5: 0 up to 2000 μg/m³
• PM10: 0 up to 2000 μg/m³

Data storage

• Measurement data: 5,000 data records on the internal flash memory (optional memory expansion with a MicroSD card: up to 16 GB)
• Photo: JPEG format, resolution 640 x 480 pixels
• Video: 3GP format, resolution 320 x 240 pixels

Equipment

• Display: 2.8 inch colour LCD display, 320 x 240 pixels, with backlight
• Functions: maximum, minimum and average display, measured value hold function, alarm function, language selection, °C/°F switch, photo or video recording, adjustable automatic display switch-off (90 seconds, 2 minutes or 4 minutes) and device switch-off (3 minutes, 15 minutes or 60 minutes)
• Memory expansion: Slot for removable MicroSD memory card
• PC interfaces: USB connection

Power supply:

• Battery type: Polymer Li-Ion
• Operating time: approx. 4 hours of continuous operation
• Charging time: approx. 2 hours with an AC adapter

Physical characteristics:

• Dimensions L x W x H: 57 x 75 x 240 mm
• Weight: 570 g

Optional:

At first read the data stored in the device, such as pictrues, Excel sheets or graphics through the Software included n the scope of delivery. Then transfer the results by copying and pasting to one of ready-made report templates frm MultiMeasure Studio PRO Software, with which one can prepare the professionall measurment reports within a short time. The already included text templates (at the moment only avaliable in German) are editable and can be complied with the user’s defined models.

Scope of supply: measuring device, mini tripod, transport case, zero filter and connection hose, battery charger, USB connection cable and software, operating manual