Compuload Excavator Scales

SKU: I-CL-EXCAV Category:

The Compuload Excavator Scales are essential for sites such as quarries, building sites, mine sites etc where either there is no weighbridge, or the weighbridge is some distance away from the loading site. The Excavator Load Weighing System has dual IP67 protected angle sensors that are mounted on the main boom and also the dipper arm which will monitor and compensate for the differing angles, and dual pressure sensors in the hydraulics for accurate readings. The weighing height is adjustable to allow for weighing from a stockpile or weighing from “roadside”. This system can be installed on machines greater than 10T with capability to install on 5T machines with some functionality.

Excavator Scales

The Compuload Excavator Scales are essential for sites such as quarries, building sites, mine sites etc where either there is no weighbridge, or the weighbridge is some distance away from the loading site. The Excavator Load Weighing System has dual IP67 protected angle sensors that are mounted on the main boom and also the dipper arm which will monitor and compensate for the differing angles, and dual pressure sensors in the hydraulics for accurate readings. The weighing height is adjustable to allow for weighing from a stockpile or weighing from “roadside”. This system can be installed on machines greater than 10T with capability to install on 5T machines with some functionality.

The Compuload Excavator Scales are modern sleek display which is easy to read in all light conditions.

  • Ultra display for easy viewing in direct sunlight
  • The Excavator Scales is the result of many years of experience in weighing systems for excavators
  • The Excavator Scales is essential for quarries and mines without weighing bridges, ideal as backup for weighing bridges located far away from the loading area
  • The Excavator Scales speeds up the loading operation achieving the maximum filling capacity of the truck, reducing laps to weighing bridges, avoiding truck over and under loads performing dynamic vertical lifts
  • The Excavator Scales increases productivity of your machine by performing weigh accuracy within ±3% when loading loose materials
  • The Excavator Scales has an outstanding self learning calibration that reduces drastically the system implementation time
  • The Excavator Scales thanks to its revolutionary loading and management technology, increases productivity and consequent profit of your daily job
  • Up to 2 machines calibrations
  • Data Management for weighing

Electrical Characteristics

Power Supply: 9 ÷ 30 Vdc
(Operates on vehicle power supply directly)

Mechanical Characteristics and Ratings

• Housing: Plastic
• Protection: IP65
• Operative Temperature Range:
-20°C / +70°C [-4°F / 158°F]
• Storage Temperature Range:
-30°C / +80°C [-22°F / 176°F]

Get in touch

Contact Us

Request more info about: Compuload Excavator Scales

Get in Touch

Please contact us if you require any further information.

  • This field is for validation purposes and should be left unchanged.