Trimble Wireless Infrastructure

WORLD LEADER IN INDUSTRIAL TECHNOLOGY

Trimble® is the world leader in a wide range of positioning technologies including GPS, laser, optical and inertial technologies with application software and information services to provide complete industrial solutions. None of this would have been possible without the support of Trimble’s wireless communications technology, from mobile radios for RTK surveying to satellite networks for world-wide data communications.

LICENSE-FREE, CERTIFIED AROUND THE WORLD

The Trimble TMR1 is a dual ISM band (865-870 and 902-928 MHz) networked transceiver supporting license-free wireless communications around the world. With available throughput up 2.6Mbps, the TMR1 allows you to seamlessly integrate both serial and Ethernet traffic as well as having the throughput available for video. Range as high as 70 miles has been demonstrated in low noise environments. The TMR1’s high performance and versatility make it ideal for oil/gas, water and electric utilities, environmental monitoring and agricultural applications.

ADAPTIVE SPEED/MODULATION TECHNOLOGY

The Trimble TMR1 supports both point-to-point and point-to-multipoint network topologies. With most networked radios operating in point to-multipoint mode, the speed of the access point radio is restricted to the speed and modulation of the weakest link. For example, if one link can only maintain 256 kbps with 2FSK modulation, all links will operate at the same reduced speed/modulation. But the Trimble TMR1 supports multiple speed/modulation pairs within a single network allowing a TMR1 master radio to select the optimal speed for each individual remote radio. This unique capability automatically adapts to changing signal and noise levels by selecting the highest link rate/ modulation pair maintainable for each individual radio link without forcing the entire network to operate at the speed of the slowest link. So a distant radio or changing noise
levels won’t drag down the speed of the whole network.

DUAL DATA PORTS FOR BOTH SERIAL AND IP COMMUNICATION

The Trimble TMR1 is equipped with two data connectors: one for serial/power and one for Ethernet. This allows you to attach sensors to the TMR1 in the field and to communicate with any TMR1 via Ethernet cables, a LAN/WAN or the Internet. All links can be protected by AES 128- and 256-bit data encryption and VLAN segregation, so only you are allowed to communicate with your network.

RUGGED, WATERPROOF, MADE FOR THE REAL WORLD

The Trimble TMR1 is built to survive in real-world industrial applications, from mines and construction sites to warehouses and oil rigs. The rugged aluminum housing and connectors are certified to withstand submersion in 1 meter of water and are chemically treated to withstand corrosion.