The Apache Bullseye 6 Machine Receiver is a specially designed 360° laser receiver with built-in angle compensation and a plumb indicator.

The Angle Compensation automatically calculates and corrects the grade display for the angle of the dipper arm. The user can check the grade with the dipper arm extended or retracted up to 30 degrees.

The “Excavating Dig Mode” feature of the Bullseye 6 allows the operator to move the “on-level” position for a greater receiving range when digging down. The Bullseye 6 will detect/pick up the rotating beam of a laser level, which is mounted on a tripod away from the machine. The super bright LED lights, which can be seen from inside the cab, indicate above, level and below grade.

There are 3 brightness modes and 6 selectable accuracy modes (3 accuracy modes for grading, 3 for excavating) to let the operator work from rough grading & cutting to final finishing pre work. The Bullseye 6 features built-in clamps, which attach to round or square tubes between 38 -50mm diameter. An optional MM2 heavy duty magnetic mount with a 42mm diameter pole, allows the user to change the Bullseye 6 between different earthmoving equipment.

Optional rechargeable battery kits and 12V/24V power options are available. The Bullseye 6 can be used with the Apache CB26 and CB52 automatic control boxes for single or dual receiver machine control. Made in the USA, the Bullseye 6 comes standard with a 2 Year Manufacturer’s warranty covering any defects in materials or workmanship.

Bullseye 6 Machine Receiver Specifications

• Operating Range: Up to 460m radius (dependant on rotating laser model)
• Reception Angle: 360⁰
• Vertical Detection Height: 220mm
• Display: LED lights with above, on grade and below indication
• Angle Compensation Range: Up to 30⁰
• Plumb Indication Range: +/- 2.5⁰
• Accuracy-Grading: Setup (5mm), Fine (10mm), Standard (20mm), Coarse (40mm)
• Accuracy-Excavation: Setup (6mm), Fine (12mm), Standard (25mm), Coarse (50mm)
• Automatic Machine Control Compatibility: Yes, with CB26 and CB52 control boxes
• Battery Type: Rechargeable NiMH
• Battery Life: Up to 75 hours
• Weight: 2.4kg incl. batteries

Bullseye 6 Machine Receiver More Information

World’s first and only self-contained, on board, Angle Compensation for Excavation (ACE) – ACE automatically calculates and corrects grade display for the angle of the dipper arm On grade offset mode for excavation tasks +/- Swing Range (plumb mode), +/- 10° to +/- 30° Swing Range (ACE mode) 220mm vertical reception window Greater than 460m operating range (depending on laser) 4 selectable accuracies (in grading mode), 2 selectable accuracies (in ACE mode) allow work from rough grading to finishing Ultra bright LED display – settings include bright, dim or off 75 min automatic shut off with no laser strike 2 hour warning for low battery indicator 45 hour battery life (alkaline – bright setting) or 30 hour battery life (NiMH – bright setting) 3-4 hour recharge time for NiMH batteries Can be run off machine power, 4 x C-cell NiMH (75 hours) or 4 x C-cell alkaline (50 hours) Quickly clamps to standard sized pipe (42-50 mins) for no-slip mounting (either pipe welded to machine or see optional heavy duty magnetic mount) Waterproof construction – designed to withstand all weather conditions IP67 2 YEAR WARRANTY