Single Channel Node
Some of the geotechnical probes compatible with the Single Channel Node:
- Crackmeter
- Strain-Gauges
- Temperature sensor
- Inclinometer probes
- Pressure cell
- Load cell
- Hygrometer
- Piezometer
- Anemometer
- Rain gauge
- Radar level probe
| INTERFACE | PRODUCT CODE |
|---|---|
| 4-20mA | DECKSCN-MA0 |
| mV/V | DECKSCN-MVV |
| Voltage (5 V) | DECKSCN-V05 |
| Voltage (12 V) | DECKSCN-V12 |
| Vibrating Wire | DECKSCN-VBW |
| Pt100-Pt1000 | DECKSCN-PT1 |
| NTC | DECKSCN-NTC |
| Potentiometer | DECKSCN-POT |
Download Technical Specifications Here – Single-Channel-Node-Datasheet-Move-Solutions
Single Channel Node
Our Single Channel Node is a wireless data logger that makes geotechnical probes suited for LoRaWAN wireless communication. Each node supports one geotechnical probe, and can accommodate an extra NTC thermistor. The Single Channel Node can be configured on our Move Cloud Platform: you can set different parameters remotely and monitor the data collected at any time. This new Node comes with increased battery life, a wider range of supported probes and a new accelerometer-triggered acquisition mode.
8 models for the widest possible compatibility
The Single Channel Node is available in 8 models, each one suited for a different kind of probe interface. Refer to this chart to choose the correct models for your needs.
Geo-environmental Monitoring
Analyzing the displacement of the ground (settlement or lateral movement) and the stress-deformation state of the ground with inclinometer probes and vibrating ropes. You can also monitor all external atmospheric agents such as wind direction and speed, rain, humidity and temperature.
Hydrogeological Monitoring
With sensors such as piezometers, it is possible to monitor the level of groundwater and surface water and correlate it to the soil subsidence values.
Structural Monitoring
The use of crack meters allows you to keep a dangerous crack pattern under control. You can also monitor the stress-strain state of the structural elements using strain gages and correlating the data with the temperature.
Geotechnical Monitoring
By inserting load and pressure cells into the ground, it is possible to monitor both the pressures exerted by the ground and the distribution of loads on the foundations and their deformations.
Description
Our Single Channel Node is a wireless data logger that makes geotechnical probes suited for LoRaWAN wireless communication. Each node supports one geotechnical probe, and can accommodate an extra NTC thermistor. The Single Channel Node can be configured on our Move Cloud Platform: you can set different parameters remotely and monitor the data collected at any time. This new Node comes with increased battery life, a wider range of supported probes and a new accelerometer-triggered acquisition mode.
Key Parameters:
- LoRaWAN wireless communication for wired geotechnical sensors
- Built-in long-life battery
- Acquisition cadence to be set remotely
- Two types of acquisition methods: programmed and triggered by unusual events
- Auxiliary NTC reading features (except DECKSCN-PT1 and DECKSCN-NTC nodes)
- Improved accuracy
- Internal antenna
- Small package (130×171.2×62 mm)
- Deeply integrated with Move Solutions Cloud Platform
- Easy installation with options suitable for every structure
- Waterproof rating IP67
Get in touch